Feature:
1. Equipped with this motorized valve, you can easily control medium flow, pressure, temperature, etc.
2. The electric control valve has low power consumption, high output power and low operating noise.
3. Enables flexible using in various fields, including power, petroleum, chemical, metallurgy, and so on.
4. Adopting metal gear as the transmission gear, the driver ensures stable working and high efficiency.
5. Premium brass material is also wear resistant, bringing the valve great durability for long term use.
Specification:
Item Type: Electric Motorized Valve
Material: Brass
Connecting Method: 2 Way
Working Voltage: AC 220V
Pressure: 1.6MPa
Working Medium: Water
Fluid Temperature: 10 95 celsius
Nominal Pressure: PN16
Connection Method: BSP parallel female thread type (BS2).
Flow Rate Characteristics: Equal percent, linear.
Leakage Rate: Less than 0.05percent of KV value.
Function: By receiving the control signal output by the adjustment control unit, the final control component uses power operation to change the process parameters such as medium flow, pressure, temperature, liquid level, etc.
Application Scenarios: Widely used in industrial process automatic control systems in power, petroleum, chemical, metallurgy, environmental protection, light industry, teaching and scientific research equipment industries. .
Package List:
1 x Electric Motorized Valve1 x Hex Wrench1 x U Shape Piece1 x Label Sticker1 x User Manual
Note:
1. The regulating valve is a field instrument, and the ambient temperature should be in the range of ‑25 60 celsius , and the relative humidity should be less than 95percent . If it is installed in the open air or in a high temperature place, waterproof and cooling measures should be taken. Keep away from the vibration source or increase anti vibration measures where there is a seismic source. 2. The regulating valve should generally be installed vertically. Under special circumstances, it can be tilted. When the tilt angle is large or the valve itself is too heavy, the valve should be protected by supporting parts. 3. Generally, the pipeline for installing the regulating valve should not be too high from the ground or the floor. When the pipeline height is greater than 2 metres, the platform should be set to facilitate the operation of the hand wheel and the maintenance. 4. The pipeline should be cleaned before installation of the regulating valve to remove dirt and welding slag. After installation, in order to ensure that no impurities remain in the valve body, the valve should be cleaned again, that is, all valves should be opened when the medium is introduced to prevent the impurities from getting stuck. After using the hand wheel mechanism, it should be returned to the original neutral position. 5. Please note that the new type and old type of this product will be sent randomly,and make sure you will not mind before ordering.
No-delivery refund
