ICQUANZX 5pcs SG90 9G Micro Servo Motor Kit, RC Robot Arm/Hand/Walking Helicopter Airplane Car Boat Control Cable, Mini Servo Arduino Project

Product Specifications: 1. Environmental Conditions: Operating Temperature Range: -10°C to 50°C Operating Voltage Range: 4.8V to 6.0V 2. Dimensions: 23mm x 12.2mm x 29mm (L x W x H) 3. Electrical Specifications (Performance): Operating Speed ​​(No Load): 0.09±0.01 sec / 60° (4.8V) 0.08±0.01 sec / 60° (6V) Operating Current (No Load): 400±30mA (4.8V) 500±30mA (6V) Stall Torque (Locked): 2.0±0.20kg-cm (4.8V) 2.2±0.20kg-cm (6V) Stall Current (Locked): 1300±40mA (4.8V) 1600±50mA (6V) Idle Current (Stopped): 6±1mA (4.8V) 6±1mA (6V) Running Life (No Load): >350,000 RPM (4.8V) >320,000 RPM (4.8V) 4. Mechanical Specifications: Limit Angle: 200°±1° Weight: 9±1g Connector Wire Gauge: #28 PVC Connector Wire Length: 250±5 mm Spline: 21T Horn Type: Cross, Star, Bar Excessive Play: ≤0.5° 5. Control Specifications: Control System: Pulse Width Adjustment Amplifier Type: Analog Controller Operating Travel: 120°±10° (900→2100μsec) Left and Right Travel Angle Deviation: ≤6° Center Deviation: ≤1° Neutral Position: 1500μsec Deadband Width: 7μsec Rotation Direction: Counterclockwise (900→2100μsec) Pulse Width Range: 900→2100μsec Maximum Travel: Approximately 120° (900→2100μsec)

Package Included: 5 x SG90 Micro Servo Motors SG90 9G Micro Servo Motors for remote control helicopters, micro robots, robot arms, and boats. Compatible with all types of R/C toys and DIY electronics based on Arduino and Raspberry Pi. Interface Type: Compatible with JR and Futaba interfaces. Operating Speed ​​(No Load): 0.09±0.01 sec/60° (4.8V) 0.08±0.01 sec/60° (6V). Maximum Angle: 120°. Stall Torque (4.8V): 17.5 oz/in (1 kg/cm). Deadband Setting: 7 microseconds. Amplifier Type: Analog Controller. Operating Voltage: 4.8V-6.0V. Note: The motor's starting current must be at least 1A.