ELPA LED Sensor Light, 1 Light, 10W (White / 14.5 X 18 X 11.5 Cm), Outdoor Outlet (ESL-SS1001AC)

■ Detection Method: Passive Infrared ■ Power Supply: AC 100V 50/60Hz ■ Power Consumption: Approx. 10W (Approx. 0.1W in Standby Mode) ■ Ambient Temperature Range: -20°C to +40°C ■ Lighting Time: Approx. 5 seconds to 10 minutes ■ Illumination Intensity at Start: Approx. 5 lx (Night) to (Day) ■ Water Resistance: IPX4 (Splash-Resistant) ■ Power Cord Length: Approx. 3.0 m ■ Light Source: 1 x White LED (Total Luminous Flux: Approx. 850 lm) *The LED is not replaceable ■ Weight: Approx. 605 g (including power cord) ■ Accessories: 2 mounting screws, 2 concrete sleeves, 1 masking cover, 1 clamp set [LED Rainproof Sensor Light] This LED rainproof sensor light features a slim design that complements any exterior. The sensor detects movement of people or vehicles and automatically turns on. [Adjustable Illumination Duration] The sensor detects ambient brightness and turns on the light. You can customize the illumination duration from approximately 5 seconds to 10 minutes. [Rainproof] Its rainproof construction (IPX4 equivalent) allows it to be installed outdoors, such as under a eaves. [For security] This outlet-type outdoor sensor light can be installed in a variety of ways using the included mounting screws and clamps. Recommended for security in parking lots, entryways, gardens, and other areas. Product Details: Accessories: 2 mounting screws, 2 concrete sleeves, 1 masking cover, 1 clamp set. Detection method: Passive infrared. Power supply voltage: AC 100V 50/60Hz. Power consumption: Approx. 10W (approx. 0.1W in standby mode). Ambient temperature range: -20°C to +40°C. Light retention time: Approx. 5 seconds to 10 minutes. Initial illumination: Approx. 5lx (night) to (day). Water resistance: IPX4 (splash-proof). Power cord length: Approx. 3.0m. Light source: 1 white LED (total luminous flux approx. 850lm). *The LED cannot be replaced. Weight: Approx. 605g (including power cord).