Feature:
1. Adopt advanced water flow control switch technology to ensure instantaneous water supply, power‑on, water‑off, and power‑off.
2. With no electromagnetic radiation, environmental protection and pollution‑free, microcomputer automatic control system, the product has fault self‑checking function, LED digital display current working status.
3. Personalized memory function, the last working status is displayed when the machine is turned on, which is convenient and worry‑free.
4. Fast heating, ready to use, no capacity limit, no preheating, avoiding the heat loss caused by the long preheating process, saving electricity and energy.
5. Dual temperature intelligent control system, anti‑over‑temperature dry‑burning protection device. Built‑in anti‑leakage protection device, and other multiple protections to ensure safety.
Specification:
Item Type: Water Heater
Color: As shown in the picture
Weight: Approx. 1500g 52.9oz
Rated Power: 5500W
Rated Voltage: 220V
Rated Water Pressure: 0.6MPa
Wire Configuration: Wire length is about 0.55m 1.8ft
Minimum Water Inlet Pressure: 0.05MPa
Maximum Water Inlet Pressure: 0.6MPa
Water Pipe Specification: G1 2
Control Method: Touch screen
Shell Material: ABS Shell + PVC Film
Heating Body: Cast aluminum heater
Temperature Setting Range: 35 55 celsius
Heating Mode: Circulating heating
Installation Notes:
1. This product must be installed by qualified professionals.
2. Prepare percussion drill (drill Diameter 6mm), adjustable wrench, cross screwdriver, electrician s knife and other auxiliary tools.
3. Check whether the electric meter and the air switch wire meet the installation and use requirements; whether the grounding wire is really introduced into the earth.
3.1) The ground wire must be reliably grounded.
3.2) Please be sure to install an air switch with leakage protection.
4. Refer to the length of the power cord and the installation position of the air switch. Position the installation and positioning size of the machine on the wall, punch holes, and insert expansion screws; screw on the mounting screws and the distance from the wall about 3mm, then hang the water heater, and then screw the lower fixing screw
5. Connect the copper core power cord live wire L (brown or red); neutral wire N (blue); ground wire (yellow green two color wire) to the corresponding air switch or wiring terminal and tighten it to ensure a reliable connection.
6. Connect the tap water pipe to the water inlet of the machine closely; then connect the water outlet to other terminal equipment with a hose.
7. If it is a newly installed pipeline, when installing it for the first time, please drain the impurities from the pipeline before connecting with the machine.
8. The anti falling screw is installed on the top of the machine to prevent the machine from falling due to accidental touch.
Note: Sealing gaskets must be added to the water inlet and outlet pipe joints. When fixing the hose joint screws with a wrench, do not use too much force to avoid damage to the gasket and cause water leakage and damage the machine.
How to UseAfter using for the first time or after the water is cut off, the power should be turned off first, and then the water valve should be opened. Only when the water outlet pipeline has continuous water flow, it can be powered on; (If you do not do this, it may damage the product)
1). Display screen:
It is fully displayed when power on.
The digital screen is dark and bright in standby, and it displays the water temperature state when it is long on, and the set temperature state when it is flashing. The screen flashes when heating, indicating that the water flow is low or the temperature is high. When LL is displayed, it means that the water flow is too large and the temperature is too low;
When E* is displayed, it means that the self check of the machine is faulty and the heating is stopped at this time.
When is displayed, it indicates the shutdown state, and the shutdown does not heat up.
Temperature setting range: 35 55 celsius . Cycle plus temperature setting.
2). Touch button:
The left button is the power switch key; long press for 3 seconds to turn on or off.
The right key is the temperature setting key, and the temperature is added cyclically.
The buzzer will beep every time there is a button operation.
3). This product model has a sleep function. When there is no operation and water flow, it will enter the sleep state after 6 seconds, that is, the dark and bright display state. When there is operation and water flow, it will immediately display the brightest.
4). This product model has constant power and constant temperature heating modes, and the heating mode is automatically selected according to the use environment and heating conditions. When the heating temperature reaches 55 degrees C in the constant power heating mode, the heating is stopped, and when the temperature drops below the set temperature, the heating starts. When the working conditions are available, the machine prefers to use the constant temperature mode.
.
Package List:
1 x Water Heater1 x English Manual1 x Control Valve1 x Screw Accessory Kit1 x Screwdriver1 x Nozzle
Note:
1. Before installation, please ask professionals to check in detail whether the capacity of the power supply line and the electric meter meets the requirements of this machine.2. A reliable grounding wire must be installed. If there is no qualified grounding wire or the grounding wire is invalid, please do not use this machine.3. The fixed wiring must follow the wiring rules: equipped with a contact distance to provide a leakage protection switch that can be disconnected at all poles under overvoltage conditions. Please turn off the leakage switch when it is not used for a long time.4. If the electrical appliance is damaged, in order to avoid danger, it must be repaired by professionals from the manufacturer, a qualified maintenance department or similar departments.5. Do not use any socket converters to suit the installation of electric water heaters, and it is forbidden to use extension cords.6. The machine must be installed upright, and it can be energized and tested after the waterway is connected; the machine must not be placed too close to flammable materials and strong magnetic fields.7. This product is forbidden to be installed outdoors and only used indoors.8. The water outlet of the machine must not be connected to any water valve or joint not approved by the manufacturer.9. It should be stopped in the environment below less than 0 celsius , and it is strictly forbidden to connect water and electricity to the machine.10. Do not use acidic or alkaline cleaning fluids to scrub the casing of the machine. When scrubbing is needed, select a neutral cleaning agent and disconnect the power supply.11. Children and the elderly must be guided by people familiar with the operation of the product before using it.12. This machine only uses the new hose assembly that comes with the machine, and the old hose assembly cannot be reused.13. Please note tha
No-delivery refund
