Product Introduction
The signal unit has been made smaller than conventional models to reproduce a realistic appearance, and the use of 64mm straight track improves the flexibility of installation in layouts, such as in narrow spaces and on the branching side of points.
By combining it with the two included 30mm straight track pieces, it becomes equivalent to a 124mm straight track length, making it compatible with conventional products and the 20-421 124mm elevated bridge for signal units.
Power supply is DC12V compatible. Power can be supplied by connecting to the 22-018/018BK Power Pack Standard SX (+ 22-082 N-gauge AC adapter), the 24-829/829BK accessory adapter connected to the 22-017 Power Pack Hyper DX, or the 22-081 Anywhere Power Connector.
*When using this product, do not use power packs older than the 22-012 Power Pack Standard S as the power supply for operation. This may cause malfunction.
The sensor uses a flange touch method to ensure reliable operation.
When a train passes, the signal changes from "green" to "red," and then automatically returns to "red" → "yellow" → "green." When moving against the direction of the signal, it remains "red."
Compatible with the separately sold 24-848 Stop Signal Button. Connecting and pressing the button forces the signal to remain "red."
Automatically detects the layout's power supply system (analog/DCC). DCC layout compatibility is also possible by using the 22-081 Anywhere Power Connector (+ 22-082 N-gauge AC adapter) to power the signal.
*On DCC layouts, the signal is "green" in standby mode regardless of the direction of travel. Therefore, when moving against the direction of the signal, it is necessary to use the 24-848 Stop Signal Button to set it to "red."
*This product does not use batteries.
*Batteries are not included with this product.
*This product does not use fuel.
*Fuel is not included with this product.
*Paint is not included with this product.
Safety Warning
*This product may cause injury, fire, or other damage to personal safety or property if handled improperly. Please read the precautions before use and handle safely.
The N-gauge Unitrack automatic signal has been renewed. The power connection method and track length have been redesigned, allowing for easy installation of even a single unit on your layout, expanding the possibilities for play.
The signal unit itself uses 64mm long straight track, increasing the flexibility of signal placement compared to previous models. It can also be used as a 124mm long straight track, similar to previous products, by combining it with the included auxiliary track.
Connection to a stop signal button is also possible, expanding the variations in play. Power to the signal can be supplied simply by connecting the cable to the accessory adapter connected to the Power Pack Standard SX/Hyper DX or to the Anywhere Power Connector.
No-delivery refund
