Motor Controller Pwm Adjustable Speed Digital Display Encoder Duty Ratio Frequency Max 15A Zk-Mg

(1) Equipped with start-stop button, and can be external control switch, to meet various customer control requirements. (2) engine soft start function. When the starter motor, the current increases slowly and there is no current shock, which can effectively protect the motor and prolong its life. (3) Duty cycle, upper and lower duty cycle limits and duty frequency can be adjusted to make it easier for customers to operate and use their motors according to their working characteristics. (4) Button digital encoder adjusts motor speed, which is more accurate and consistent than ordinary potentiometer. (5) With standard 5135 instrument shell, convenient for customer installation. 2. technical parameters: (1) Working voltage: DC5V to 30V, anti-reverse protection connection input (2) Rated Current: 5A 15A Max Current (3) Max power: 150 W (4) Working frequency: 1 KHz to 99 adjustable KHz, 1 KHz step, 20 KHz standard frequency, accuracy about 1 (5) Duty cycle: 0-100, 1 step (6) Product Size: 78mm * 44mm All parameters can be set to low storage power. 3. operating instructions: (1) wiring instructions (2) digital encoder button operation In the default interface :( the duty cycle is displayed by default) Short press-switch motor start and stop Long press ... to enter setup interface Counterclockwise rotation ... duty ratio decreases Clockwise rotation ... increase cycle Under the setup screen: Short press - select configuration parameters and toggle between lower limit cycle, upper duty cycle and duty cycle Frequency. the lower limit duty cycle display is "L" , two digits, the upper limit duty cycle display is "H" , two digits or "100", and the frequency display of job is "F" , two digits. Long press ... exit setup interface Counterclockwise Rotation - Corresponding Settings Are Reduced Clockwise rotation-setting parameters increase accordingly (3) back STOP port 3.3v level or key switch can be connected externally. Change the motor start / stop state when the key is closed or 3.3 v level is reduced. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.