Car Dent Puller T Dent Repair Tool Auto Repair Sheet Metal Kit Slide Hammer Reverse Hammer Glue +18pcs Glue Puller

1.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;

2.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);

3. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);

4. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);

5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;

6. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;

7. Clean the repaired place with a clean wet cloth.

Package Contents:

1* Car Dent Puller Tools

18* Blue Glue Tabs/ Lifter Glue Puller

Only the above package content, other products are not included.