Dirt Freak DFG Blitz Goggles, BPM Trip Multi, REVO Blue Mirror, VLT44%, Anti-Fog, Outrigger Frame, D8969

[Precautions] - Do not use parts cleaners, organic solvents (thinner, alcohol, etc.), adhesives, detergents, soap, etc. on your goggles. This may cause deformation or deterioration. - Prolonged external pressure on your goggles may cause deformation, so remove them from your helmet and store them separately after use. - Be careful not to touch the lenses directly with your hands. - If dirt or fingerprints get on the lenses, gently rinse them off with running water. Be careful not to rub the inside of the lenses. Absorb any moisture with a soft, lint-free cloth before drying your goggles. - Be careful not to wipe the anti-fog coating on the inside of the lenses with excessive force, as this may cause the coating to peel off. - Do not rub water-repellent or anti-fog surfaces too hard. This may cause the coating to peel off. - Do not use parts cleaners, organic solvents (thinner, alcohol, etc.), adhesives, detergents, soap, etc. on your lenses. This may cause deformation or deterioration. - To clean the lenses, gently wipe the surface with a damp microfiber cloth. - If the lenses are scratched, purchase replacement lenses. - To remove the nose guard, pull it straight out vertically. The left and right outriggers evenly distribute the strap tension throughout the frame, securing the entire goggle in place with a balanced fit. This improves the fit to your face and provides a comfortable fit. The highly absorbent three-layer face foam with different densities effectively absorbs sweat and other moisture. The 18mm thick foam provides a soft fit and a strong seal. The gently curved frame design is designed to fit the Japanese face shape. Anti-slip silicone is placed on the underside of the strap to reduce strap slippage when wearing the helmet. Anti-slip silicone width: approximately 10mm A nose guard is included as standard. The nose guard is removable.