Cekol Q1 Uni Universal Tile Adhesive 5 kg
Universal tile adhesive by Cekol enables the thin-layer gluing of ceramic tiles to concrete, brick, cement, and cement-lime plasters. Possibility of gluing blocks and bricks with a thin joint.
The tile adhesive is frost-resistant, waterproof, and environmentally safe. Suitable for exterior and interior use. The product is adapted for leveling the substrate.
Product Advantages and Features
The product is a frost- and waterproof adhesive mortar for interior and exterior use.
Characterized by increased adhesion.
Thanks to its precisely selected formula, it exhibits high resistance to sagging.
Universal – for gluing ceramic tiles using the thin-bed method to concrete, brick, cement, and cement-lime plasters.
Environmentally safe.
Substrate preparation
The substrate should be clean, compact, and free of grease. Any residues of emulsion or oil paints as well as loose sand grains should be removed with a putty knife or rough brush. Highly absorbent substrates should be primed with a deep penetrating primer.
Application
Mortar preparation . Prepare the adhesive by pouring 1 kg of powder into 0.22 – 0.24 l of water (4.4 – 4.8 l of water per 20 kg bag), and then mix thoroughly with a low-speed mixer until uniform. Wait approximately 3 minutes and mix thoroughly again. Mortar use-up time: approx. 3 hours.
Applying the adhesive. Apply the adhesive to the prepared substrate using a notched trowel. When gluing tiles outdoors, it is recommended to gluing in a continuous layer and additionally smearing the underside of the tile with a thin layer of adhesive, which significantly improves adhesion.
Storage
Store in dry rooms, in original packaging.
Parameters:
Brand: Cekol
Capacity: 5 kg
Application: Notched trowel
Adhesive class: C1E
Joint strength expressed as: initial adhesion ≥ 0.5 N/mm²
Joint durability under thermal conditioning/aging conditions expressed as: adhesion after thermal ageing ≥ 0.5 N/mm²
Joint durability under water/humidity conditions expressed as: adhesion after water immersion ≥ 0.5 N/mm²
Joint durability under freeze-thaw cycles expressed as: adhesion after freeze-thaw cycles ≥ 0.5 N/mm²
Mixing proportions: 0.22 to 0.24 l of water per 1 kg of dry powder
Tile correction time: 10 minutes
Coverage: approx. 2.7 kg/m² when using a 10 mm notched trowel
Layer thickness: From 2 to 10 mm
Application and substrate temperature: + 5°C to + 25°C
Suitable for foot traffic and grouting: Approx. 24 hrs. at 18°C
Reaction to fire: A1/A1fl
The product has: Hygiene certificate
Application: Tile adhesive
The price is for one piece
No-delivery refund
