Cekol Q5 Pro Hybrid Tile Adhesive 5 kg
Hydrophobic tile adhesive by Cekol enables gluing marble, granite, stone, ceramic tiles and glass mosaics to mineral substrates. Thanks to its white color, there is no risk of discoloration on the tile surface .
The tile adhesive is waterproof, frost-resistant and flexible. Suitable for indoor and outdoor use. Allows tiles to be glued from the top. The product is reinforced with fiber.
Recommended for gluing tiles to typical and heated surfaces. The use of white cement as a binder significantly reduces the risk of discoloration on the tiles. Possibility of filling and leveling substrates.
Advantages and features of the product
The product is a flexible, frost- and waterproof adhesive mortar for indoor and outdoor use.
Characterized by increased adhesion.
Thanks to its precisely selected formula, it exhibits high resistance to sagging, making it possible to glue tiles from the top.
Universal – for marble, granite, stone, ceramic tiles, and glass mosaics on mineral substrates.
The use of white cement as a binder significantly reduces the risk of discoloration on tiles.
Reinforced with fiber.
Substrate preparation
The substrate should be clean, compact and free of grease. Any residues of emulsion and oil paints as well as loose sand grains should be removed with a putty knife or rough brush.
Priming
Highly absorbent substrates should be primed with a deep penetrating primer.
Application
Mortar preparation. Prepare the mortar by pouring 1 kg of powder into 0.25 – 0.27 l of water (5 – 5.4 l of water per 20 kg bag), then mix thoroughly with a low-speed mixer until uniform. Wait approximately 3 minutes and mix thoroughly again. Mortar workability time: approximately 3 hours.
Applying the adhesive. Apply the adhesive to the prepared substrate using a notched trowel. When gluing outdoors and to improve the adhesion of highly absorbent tiles and porcelain stoneware tiles, CEKOL Q-5 PRO should be applied in a continuous layer to both the substrate and the underside of the tiles. Before applying CEKOL Q-5 PRO adhesive to heated surfaces, turn off the heating. It can be turned on at least 7 days after laying the tiles.
Storage
Store in dry rooms, in original packaging.
Parameters:
Brand: Cekol
Color: White
Capacity: 5 kg
Application: Notched trowel
Adhesive class: C2TE
Joint strength expressed as: Initial adhesion ≥ 1 N/mm²
Joint durability under conditioning/thermal ageing conditions expressed as: Adhesion after thermal ageing ≥ 1 N/mm²
Joint durability under water/humidity conditions expressed as: Adhesion after water immersion ≥ 1 N/mm²
Joint durability under freeze-thaw cycles expressed as: adhesion after freeze-thaw cycles ≥ 1 N/mm²
Mixing ratio: 0.25 to 0.27 l of water per 1 kg of dry powder
Tile correction time: 10 minutes
Coverage: Approx. 2.7 kg/m² when using a 10 mm notched trowel
Layer thickness: Up to 20 mm
Application and substrate temperature: + 5°C to + 25°C
Suitability for foot traffic and grouting: Approx. 24 hrs. at 18°C
Reaction to fire: A1/A1fl
The product has: Hygiene certificate
Slippage (T) ≤ 0.5 mm
Extended open time (E) adhesion: ≥ 0.5 N/mm2 after a time not shorter than 30 min
Application: Tile adhesive
The price is for one piece
No-delivery refund
