Esp32-S3 Cam Development Board Wifi Bluetooth Module Onboard Esp32-S3 N16R8 Ov2640 Ov5640 Ov3660 Camera Dual Type-C Interface

Performance parameters: Controller: XtensaR dual core 32-bit LX7 CPU with a frequency of up to 240MHz Storage: 384 KB ROM 512 KB SRAM 16 KB RTCSRAM 8 MB PSRAM Working voltage: 3V to 3.6V. Up to 45 GPIO 2 * 12 bit ADC (up to 20 channels) Communication interface: 2 12c interfaces 2 12s interface 4 SPI interfaces 3 UART interfaces 1 USB oTG interface. Temperature range: -40 to 65 degrees Celsius WiFi Supports IEEE 802.11 b/g/n protocol Supports 20 MHz and 40 MHz bandwidth in the 2.4 GHz band Supports 1T1R mode with a data rate of up to 150 Mbps Wireless Multimedia (WMM) Frame Aggregation (TX/RX A-MPDU, TX/RX A-MSDU) Immediate Block ACK Fragmentation/reassembly - Bacon automatic monitoring (hardware TSF) -4 x virtual Wi Fi interface Simultaneously supporting infrastructure BSS Station mode, SoftAP mode, and Station+SoftAP hybrid mode. Please note that when ESP32-S3 scans in Station mode, the SoftAP channel will change simultaneously Antenna Diversity 802.11 mc FTM Support external power amplifiers Bluetooth Bluetooth LE: Bluetooth 5, Bluetooth mesh High power mode (20 dBm, shared PA with Wi Fi) Supports speeds of 125Kbps, 500Kbps, 1Mbps, and 2Mbps Advertising Extensions Multiple Advertisement Sets Channel Selection Algorithm # 2: Wi Fi and Bluetooth coexist and share the same antenna Advanced peripheral interfaces and sensors 45 xGPIO port Digital interface: - 4xSPl -1xLCD interface (8-bit) -16 bit parallel RGB, l8080, MOTO6800), supporting mutual conversion between RGB565, YUV422, YUV420, YUV411 -1xDVP 8-bit~16 bit camera interface -3xUART -2xl2C - 2x 12S - 1xRMT (TX/RX) -1x pulse counter -LED PWM controller with up to 8 channels -1x Full Speed USB OTG -1 x USB Serial/JTAG controller - 2x MCPWM -1 x SDIO host interface with 2 card slots -General DMA Controller (GDMA) with 5 receive channels and 5 send channels -1xTWAI controller, compatible with IS011898-1 (CAN specification 2.0) Simulation interface: -2x12 bit SAR ADC with up to 20 channels -1x temperature sensor -14x capacitive sensing GPIO Timer: -4x54 bit universal timer -1 × 52 bit system timer -3 x watchdog timer Product size: 57mm * 28mm Packing list: Set 1: 1X development board 2X needle arrangement Set 2: 1X development board 2X needle arrangement 1X camera (OV2640/OV5640/OV3660 selectable) The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.