Good luck with your favorite purchases
Ultra Flexible Removable Magnetic Build Surface Plate for Creality Ender 3 Ender 3 Pro CR-20 3D Printer Heated Bed Parts
Feature:
1. It is more resistant to high temperature, refuses to warp edges, can be used repeatedly, easy to clean, easy to install, convenient and fast, and ready to use
2. Black frosted surface with coarse sand pattern design. The surface with coarse sand pattern is black frosted surface, which has strong flexibility and high temperature resistance, easy to stick to the printed product, and easy to take out and separate.
3. PC material mounted soft magnet material, flame-retardant, wear-resistant, anti-oxidation, low molding shrinkage rate, long-term resistance to 70℃ high temperature without demagnetization, the hot melt material and the printing layer are well combined to reduce the deformation caused by shrinkage, and avoid warping, wear-resistant and scratch-resistant , Resistant to dirt and hand sweat, can be used repeatedly
4. Easy-to-remove 3D printing platform suitable for PLA and PLA-based materials. To use it, simply glue the bottom plate to your build plate and start printing, peel off the top plate with the finished print, and then peel the top plate from the print. Snap the top plate back to its original position for the next round of printing
Specification:
Applicable model: for Creality Ender-3/Ender-3 Pro/CR-20 and other FDM 3D printer heated bed
Colour: Black
Material: PC material mounted soft magnet material
Product size: 235*235*1mm
Net weight: 496g
Instruction:
The product is divided into two parts: A (upper)+B(lower)
-Part A: The top is a matte surface, and the back is magnetic (the interaction with the front of Part B plays an attractive role)
-Part B: The top is magnetic (with the adsorption under the A part), the back is the adhesive (posted on the printer platform, which plays a fixed role)
How to use:
To use it, simply stick the bottom sheet onto your build plate place, then place the top half on top of the magnetic lower and start printing, peel up the top sheet with finished prints, then flex the top sheet to make the model pop off from the build surface. Snap the top plate back into place, and you're ready for the next round of printing.
If it fails to adsorb, please rotate it 90 degrees and try again.
Note:
This product is rated for use with PLA filaments ONLY.
This product is not for use with high-temperature printing applications above 70 °C.
There may be slight size deviations due to manual measurement, different measuring methods and tools.
The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.
1 X Build Plate Upper Part
1 X Build Plate Lower Part
No-delivery refund
