Description:
Name: Thread Locking Agent
Packing Specification: 10ml/50ml
Features:
1. Low Strength Universal Type, Easy To Disassemble
2. Removable Oil Resistant, Medium Strength, Universal Type
3. For Inert Metals, High-strength General-purpose Type, Suitable For Difficult To Disassemble Inert Metals, With A Certain Degree Of Oil Resistance.
4. Simple Design, Convenient And Applicable
5. Safe Ingredients, Do Not Hurt The Skin
Usage:
1. The bonding surface must be clean and free of any contaminants such as dirt, oil lubricants and rust.
2. When removing the product from a refrigerated environment, bring the adhesive to a low room temperature before use.
3. Keep away from children and use in a ventilated area.
4. please wear gloves when using, once the glue splashed on the skin, should be soaked in warm soapy water and peel off the adhesive stuck on the skin, remember not to use a knife for peeling, if splashed on the eyes, immediately rinse with water and go to the hospital for examination.
Points for attention:
1. This product is not suitable for use in pure oxygen or oxygen rich environments, and cannot be used as a sealing material for chlorine gas or other strong oxidizing substances.
2. This product is not suitable for use on plastics, especially thermoplastic materials that may cause stress cracking.
3. Apply an appropriate amount of glue, as surface overflow can affect internal curing. If there is any overflow, it is recommended to reapply the glue.
4. This product works better with a thin adhesive layer below 0.05mm. For oversized threads, a larger gap can affect the curing speed and strength of the product.
No-delivery refund
