Specification
Product Name: 4'' In-line blower
Material: ABS(AcrylonitrileButadieneStyrene)
Color: White
Intake: 4'' (102mm)
Working Voltage: 12V
Capability: 270CFM
AMPS: 6.0A
Fuse size: 10.0A
Features:
●4 fan blades maximize the air volume
●Efficient high volume air flow
●Heavy duty motor
●Low current, large air volume, long life.
●Slip on inlet & outlet ducting connections
●Sealed motor shaft for moisture protection
●Low amp draw
●Corrostion resistant motor housing
INSTALLATION
1. The blower must be used with a natural ventilation system that is open to the atmosphere.
2. Mount the blower in the upper portion of the bilges,engine compartments, galleys and heads with twono 10 screws. Secure blower in place taking care not to over tighten screws or penetrate the hull
3 . Position blower with flow arrow towards exhaust vent ( be sure to determine the correct direction of airflow before mounting ) The in-line blower may be mounted on an angle toassure drainage from rainwater
4. Connect ( 130-01series-three inches and 270-02s eriesfour inches ) diameter inlet and exhaust duct with stainless steel hose clamp
5. The duct inlet opening should be permanently fixed and located above the normal bilge level and as practicable beneath the engine which It serves.
Package included :
●1 x 4'' In-line blower
Note :
1.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm).
2.The color of the actual items may be slightly different from the listing images due to different computer screen, thanks for your understanding.
3.There is no instruction included.If you want to know how to use or install it,please contact us by Email!
No-delivery refund
