ingredients:
This care spray is made of a combination of citric acid and aminosulfonic acid. The ratio of raw materials has been blended and optimized, and the texture is soft. It is suitable for daily surface maintenance and cleaning scenes of various conventional metal objects, and it is suitable for use in many scenes such as car hardware and household metal accessories.
Ingredient function
1. Citric acid: Assists in softening the oxidation marks and surface stains attached to the metal surface, gently loosens the accumulation of impurities on the surface, which is easy to wipe and clean, and the gentle effect is not easy to irritate the metal substrate.
2. Aminosulfonic acid: assists in improving the overall cleanliness and adaptability, evenly disperses the acting medium of the formula, cooperatively optimizes the state of the metal surface with citric acid, assists in the formation of a thin and thin maintenance layer on the metal surface, and reduces the impact of the external environment on the metal.
Efficacy selling point
Gently improve the oxidation marks on the metal surface and smooth out the messy state of the surface
After use, a thin and thin curing film can be formed on the surface of the metal to reduce the surface loss caused by the external environment.
The formula has a soft effect, and it is not easy to damage the metal and surrounding materials under standardized operation.
After cleaning, it helps the metal surface to return to a clean and tidy basic state, smoothes the rough surface, and optimizes the delicate texture of the surface.
Long-term care for the metal surface layer, assist in delaying the aging of the surface layer, and lengthen the normal service cycle of the object
The operation process is simple and easy to use, and it can be easily used in home and car scenes.
How to use
1. Pre-wipe and clean up large areas of impurities such as dust and oil stains on the surface of metal objects to ensure that the working surface is basically clean
2. Shake the spray bottle thoroughly, mix the internal raw materials evenly, and spray evenly on the area with traces of oxidation.
3. Let stand for a short period of time, allowing the formula to fully come into contact with the traces on the metal surface
4. Use a soft wiping tool to wipe the residual material on the surface clean
5. Take water to thoroughly rinse the metal objects as a whole, and let them stand to dry to complete the maintenance and cleaning.
Precautions
1. This product is only suitable for the maintenance and cleaning of the surface of conventional hard metal materials, and cannot be used for non-acid-resistant materials such as paint, plastic, fabric, wood, etc.
2. The operating space needs to maintain air circulation to avoid continuous inhalation of spray aerosols at close range for a long time
3. It is recommended for people with sensitive skin to wear household protective gloves when operating to reduce direct contact with liquids on the skin of the hands for a long time.
4. Store in a cool, dry and dark area, and keep out of the reach of children and pets. It is strictly forbidden to eat by mistake.
5. Do not mix and match this product with other cleaning preparations to avoid unnecessary chemical reactions
6. Do not store at high temperature or expose the bottle to the sun, and store away from open flames and high-temperature heat sources.
7. A single spray can be used on demand, without excessive spraying, excessive spraying will increase the workload of subsequent wiping and rinsing
8. If the liquid accidentally touches the eyes, immediately take a lot of flowing water and continue to rinse the eyes. If the discomfort cannot be alleviated, please seek medical attention in time.
9. The storage area is away from food, tableware, and drinking water containers, and is stored in separate partitions.
10. This product is a metal surface maintenance and cleaning product, and cannot be used as a human body care and food cleaning consumables.
11. Before using special metal materials with light and thin coating and easy to corrode, it is recommended to test in a small area of the object to confirm that there is no abnormality before using it in a large area.
No-delivery refund
