Makita 18V Impact Driver TD173DZB Black Only Dedicated Storage Sold Separately (Tool + Case) Charger

[Specifications] Maximum tightening torque: 180 N・m Tightening capacity: Small screws M4-M8, standard bolts M5-M16, coarse thread 22-125, high-strength bolts M5-M14 Weight: 1.5 kg (including battery) Rotation speed min-1 (revolutions/minute): Fastest: 0-3600, Strong: 0-3200, Medium: 0-2100, Weak: 0-1100 Wood: 0-1800, Bolt (forward rotation): 0-3600, Self-tapping thin plate: 0-2900, Self-tapping thick plate: 0-3600 Impact rate min-1 (revolutions/minute): Fastest: 0-3800, Strong: 0-3600, Medium: 0-2600, Weak: 0-1100 Wood: 0-3800, Bolt: 0-3800 Thin Tex plates: Stop immediately after impact begins. Thick Tex plates: 0-2600. Machine dimensions (mm) (length x width x height): 111 x 81 x 234 Introducing the new 18V rechargeable impact driver, the TD173DZ (body only). Available in 5 colors, including the limited edition "Fresh Yellow" and "Authentic Purple". This is the first 18V rechargeable impact driver in Japan* to feature a "full-circumference" ring-emitting LED light! The brightness is approximately 2.5 times that of our previous models. The full-circumference ring illumination suppresses the shadow of the bit, improving visibility. Ease of use is thoroughly pursued through optimal balance and placement in "all directions". By offsetting the battery to the rear, the center of gravity is optimized, allowing for well-balanced tightening and reducing interference with obstacles. The grip is closer to the head, making it easier to push the shaft, thus reducing cam-out. The control panel is positioned at the "rear", making it easier to see and use even during work. It is equipped with 4 easy modes (wood/bolt/thick plate/thin plate) to assist in various work scenes. ● The slim head with no protrusions ensures the smallest tilt in the industry in all directions when driving into corners. ● The "zero wobble" mechanism with double ball bearings minimizes bit runout in the industry. ● The plastic case is IP65 compliant, protecting it from dust and rain. Holds up to 4 tethers. ● New trigger switch allows for intuitive trigger speed adjustment from low to high speed. ● Easily switch impact modes with a button on the handle while holding the grip. ● Mode memory function allows you to register one frequently used mode. ● Maximum tightening torque: 180 N・m ● Overall length: 111 mm ● Weight: 1.5 kg (with BL1860B battery installed) Work volume per charge (approximate) Screw tightening Wood screws 5.4 x 90 mm: approx. 550 pieces Wood screws 4.3 x 65 mm: approx. 960 pieces Small screws M8 x 16 mm: approx. 5,280 pieces ------------------------------------------- 18V battery specifications ■ TD173DZ Main unit only 5 colors including limited edition colors ● [Blue] ● [Black] ● [Olive] ● [Fresh Yellow] *Limited edition ● [Authentic Purple] *Limited edition