Label:Yes
Type: Food Mixer Part
Color: Silver
Size: 125×125×155mm (4.9×4.9×6.1")
Process: Riveting assembly
Package included: 1 x Wire Whip
Material: 304 stainless steel + aluminum A380
Features:
- It can be used in mixers, milkshakes and noodle makers.
- The product which is very firm stirs well has a good fit with devices. Fits for KSM15, KSM110, KSM103, KSM75, KN15, K45, and KSM90 models stand mixers.
- 6 wire whip for quickly incorporating into ingredients for fluffy whipped cream, great boiled frostings and cakes with whipped egg whites.
- Low noise, easy to install and easy to clean.
Attach/Remove a wire whip:
To attach Wire Whip:
1) Turn speed control to OFF.
2) Unplug Stand Mixer or disconnect power.
3) Tilt motorr head back.
4) Slip beater onto beater shaft and press upward as far as possible.
5) Turn beater to right, hooking beater over pin on shaft.
6) Plug into a grounded 3 prong outlet.
To Remove Wire Whip:
1) Turn speed control to OFF.
2) Unplug Stand Mixer or disconnect power.
3) Tilt motorr head back.
4) Press beater upward as far as possible and turn left.
5) Pull beater from beater shaft.
Adjust the BEATER TO BOWL CLEARANCE:
If the rope is too far from the bowl or hits the bottom of the bowl, you can easily correct the gap.
1) Turn speed control to OFF.
2) Unplug Stand Mixer or disconnect power.
3) Tilt motorr head back.
4) Turn beater height adjustment screw SLIGHTLY counterclockwise (left) to raise the Wire Whip or clockwise (right) to lower the Wire Whip.
5) Make adjustment so that the Wire Whip just clears the surface of the bowl. If you over adjust the screw, you may not be able to lock the motorr head when it is lowered.
Notice:
1.Please allow 1-5mm error due to manual measurement. Please make sure you do not mind before you bid.
2.The colors may have different as the difference display, please understand.
No-delivery refund
