Transfer Switch Dual Power Fast Switching Automatic 230V AC 100A for Home Factory

It can be operated automatically or manually, with millisecond switching without power outage. It has a compact structure, reliable transmission, convenient installation and maintenance, and a long service life. Widely used in various situations where continuous power outages are not allowed When there is an abnormality in the normal power supply, the backup power supply immediately operates, ensuring the continuity, reliability, and safety of the power supply. This automatic transfer switch is suitable for emergency power supply systems with AC rated 230V 100A at 50 or 60Hz The transfer switch is made of high-quality flame-retardant plastic with good insulation, high temperature resistance, aging resistance, safety and reliability Exquisite craftsmanship, isolation and anti-interference, self switching and self resetting, stable performance, reliable use, widely used in households, shopping malls, factories, laboratories, breeding farms and other occasions Product parameters Product Name: Dual Power Automatic Switching Switch Product model: NLQ4-125/2P Switch type: secondary distribution Rated current: 100A Rated voltage: 230V AC Insulation voltage: 690V AC Rated frequency: 50Hz/60Hz Electrical level: PC level isolation type Rated impulse withstand voltage: 8KV Operating instructions Before installation, please check the integrity of the ATS, use the operating handle to turn it on or off, check the flexibility of the transmission device, and detect the generation and disconnection conditions of normal and backup power loads at each stage Packaging List Dual power automatic switching switch * 1 matters needing attention 1. The maximum ambient temperature should not exceed 40 ℃, the minimum should not be lower than -5 ℃, and the average temperature within 24 hours should not exceed 35 ℃. 2. The altitude of the installation site should not exceed 2000m. 3. When the maximum temperature reaches 40 ℃, the relative humidity of the installation site should not exceed 50%; When the temperature is at the lowest temperature of -5 ℃ and the relative humidity is high, for example, at a temperature of 25 ℃, the relative humidity is 90%. Due to temperature changes, special measures should be taken to deal with occasional condensation on the surface of the product