Hinoki Wood Bath Made In Japan Hinoki Bath [Hinoki King] Chair, Large, [Bath Chair, Seat, Wood, Chair, Wooden]

------------------------------------------------------------------------------------------------------------------ 【Color & Appearance】

Actual color may vary slightly from the photos due to screen settings, lighting, or production batch differences. 【Size Note】

Please refer to the size chart in the listing images and/or listing description before purchasing, as sizing may differ slightly from your local standards (cm-based measurements).

------------------------------------------------------------------------------------------------------------------

[Hino-o] Hinoki wood bath chair, made in Japan [Size] Approx. 33cm x 20cm x 24.5cm (height) [Weight] Approx. 1675g [Materials] Body: Hinoki cypress; Paint: Silicone paint; Leg rubber: Silicone rubber [Features] ・This is a commercial-grade bath chair used in inns and hotels. ・It has a silicone coating that hardens inside the wood and prevents water from seeping in. It dries quickly and prevents discoloration. ・It has non-slip rubber feet to prevent damage to the floor. [Care Instructions] ・After use, wash with water using a soft sponge. ・Scrubbing with a hard brush may damage the surface or weaken the effect of the coating. ・After washing, wipe off the moisture thoroughly and air dry in a place with low humidity. Leaving it wet will make it more susceptible to black stains (mold). Simply wiping off the moisture thoroughly with a bath towel after use will help prevent black stains (mold). ・After wiping off the moisture, air dry in a place with low humidity. ・Do not use bleach. [Precautions for Use] ・Do not use for purposes other than intended. Applying excessive weight may cause damage. ・Never stand on the chair. There is a risk of tipping over. ・Rapid drying in direct sunlight or with bathroom dryers/heaters may cause cracking or deformation. ・If the joints between parts become loose, stop using immediately. ・The rubber feet may come off due to friction with the floor. Always lift the bath chair when moving it. If the rubber feet come off, reinsert them or remove all the rubber feet before use. ・Although it is coated with silicone paint that penetrates and hardens inside the wood to prevent water from entering, it does not completely prevent blackening (mold). Wiping off moisture thoroughly and keeping it dry will help it stay clean and last longer. [Features] ・This is a commercial-grade bath chair used in inns and hotels. ・It is coated with silicone paint that hardens inside the wood and prevents water from seeping in. It dries quickly and prevents blackening. ・It has non-slip rubber feet to prevent damage to the floor. [Care Instructions] ・After use, wash with water using a soft sponge. ・Scrubbing with a hard brush may damage the surface or weaken the effect of the coating. ・After washing, wipe off the water thoroughly and air dry in a place with low humidity. Leaving it wet will make it more prone to blackening (mold). Simply wiping off the water thoroughly with a bath towel after use will help prevent blackening (mold). ・After wiping off the water, air dry in a place with low humidity. ・Do not use bleach. [Precautions for Use] ・Do not use for purposes other than intended. Applying excessive weight may cause damage. ・Never stand on the chair. There is a risk of falling. - Rapid drying in direct sunlight or using bathroom dryers/heaters may cause cracking or deformation. - The joints between parts may become loose. If it becomes loose, stop using it immediately. ・The rubber feet may come off due to friction with the floor. Always lift the bath chair when moving it. If the rubber feet come off, reinsert them or remove all the rubber feet before use. ・Although it is coated with silicone paint that penetrates and hardens inside the wood to prevent water from entering, it does not completely prevent blackening (mold). Keeping it dry by wiping off moisture thoroughly will help it stay clean and last longer.